GPS receivers
Showing 1–15 of 138 results
-
GPS receivers, RTK GNSS Receivers
a-GEO L8
L8 is a high-end multi-functional GNSS receiver, with a new generation of algorithm engine, Linux system, tilt survey, built-in 4G/Radio module and Bluetooth/Wi-Fi. It adopts a new appearance design, the magnesium alloy structure, and highly integrated module design. It is a perfectly multifunctional compact GNSS receiver.Channels
866 IMU Tilt Sensor
60º  Internet Modem
4G UHF Radio
410 – 470MHz GPS L1, L2, L5 GLONASS L1, L2 GALILEO E1, E5A, E5B BEIDOU B1, B2, B3 SKU: a-GEO L8 -
GPS receivers, RTK GNSS Receivers
a-GEO NetBox1
NetBox1 is a mini portable multi-functional GNSS receiver, with a new generation of algorithm engine, Linux system, tilt survey, built-in 4G all Netcom and Bluetooth/Wi-Fi. It adopts a new appearance design, the magnesium alloy structure, and highly integrated module design. It is a perfectly multifunctional compact GNSS receiver.
Channels
432 IMU Tilt Sensor
60° Internet Modem
4G UHF Radio
410 – 470MHz GPS L1, L1C, L5 GLONASS L1, L2 GALILEO E1, E5A, E5B BEIDOU B1, B2, B3 SKU: a-GEO NetBox1 -
GPS receivers, OEM Boards
Bynav C1 GNSS RTK OEM receiver
C1-8S is embedded with Bynav new generation of RTK algorithm engine and can quickly calculate the accurate relative position of antennas and the direction of the line connecting the phase center of two antennas, which is expressed as deviation from True north. It supports GPS L1/L2, GLONASS G1/G2, BDS B1/B2, BDS-3, GALILEO E1/E5B, QZSS, can be used as RTK rover station or base station, offering centimeter-level accuracy and low power consumption, as well as serial, ethernet and CAN interfaces.
SKU: n/a -
GPS receivers, RTK GNSS Receivers
Carlson BRX7
The Carlson BRx7 is a GNSS RTK receiver that delivers high precision and performance while being durable and compact.
The BRx7 has many communication options. Equipped with a GSM LTE modem, the receiver is ideal for working with VRS reference station networks with an accuracy of 8mm + 1ppm horizontally and 15mm + 2ppm vertically, and the built-in dual-band UHF radio enables base-rover measurement true GSM coverage. is missing. BRx7 also provides Carlson listen listen, a unique service that eliminates the uhf baseline length limit.
Channels
800 IMU Tilt Sensor
60º  Internet Modem
None UHF Radio
410 – 470MHz 902.4 – 928MHz GPS L1CA, L1P, L1C, L2P, L2C, L5 GLONASS G1, G2, G3, P1, P2 GALILEO E1BC, E5a, E5b, E6BC, ALTBOC BEIDOU B1i, B2i, B3i, B10C, B2A, B2B, ACEBOC Why surveyors choose Carlson BRX7:
- Multi-frequency GPS, GLONASS, BeiDou, Galileo, QZSS, IRNSS, and Atlas L-band
- Long-range RTK baselines up to 50 km with fast acquisition times with the use of Listen-Listen***
- UHF (400 MHz & 900 MHz), cellular, Bluetooth, and Wi-Fi wireless communication
- The BRx7 Athena GNSS engine providing best-in-class RTK performance
- Internal tilt sensor corrects collected point coordinates to within 2 cm
SKU: carlson-brx7 -
GPS receivers, RTK GNSS Receivers
Carlson NR3
The Carlson NR3 is a compact GNSS Smart Antenna designed for Network Rover applications. The NR3 and a prism make a light weight survey pole assembly to utilise SurvCE/PC 6.0 with Hybrid+ for simultaneous GNSS and Robotic Total Station surveys.
The new Hybrid+ feature allows simultaneous interaction with GNSS and a Robotic Total Station, with the GNSS and prism both mounted on the survey pole.
Channels
448 Â IMU Tilt Sensor
None Internet Modem
4G Â UHF Radio
None GPS L1, L2, L5 GLONASS L1, L2, L3 GALILEO E1, E5a, E5b, AltBoc BEIDOU B1, B2 Carlson NR3 package includes:
- 1 x Carlson NR3
- 4 x Li-Ion Batteries
- 1 x USB data cable
- 1 x Carlson NR3 Battery Charge
- 1 x Battery Charger Power Cable for cigarette lighter
SKU: carlson-nr3 -
Antenna's, GPS receivers
ComNav AT160
The compact-sized AT160 helix antenna is designed with high stability and repeatability at phase center, and its high gain ensures a superior performance even at low elevation angle. Available from single frequency to triple frequency, AT-series Helix antennas are optimal for Unmanned Aerial Vehicle, GIS, RTK and related mobile devices where need high accuracy GNSS positioning.
Why surveyors choose ComNav AT160:
- Support GPS L1/L2/L5, GLONASS L1/L2, BeiDou B1/B2/B3, BeiDou Global B1C/B2a, Galileo E1/E5a/E5b and SBAS
- Low noise amplifier and high gain
- Sub-millimeter level phase center error with outstanding stability and repeatability
- Strong capability of tracking satellites at low elevation angle
- Superior waterproof and dust proof design
SKU: comNav AT160 -
Antenna's, GPS receivers
ComNav AT190
The compact-sized AT190 helix antenna is designed with high stability and repeatability at phase center, and its high gain ensures a superior performance even at low elevation angle. Available from single frequency to triple frequency, AT-series Helix antennas are optimal for Unmanned Aerial Vehicle, GIS, RTK and related mobile devices where need high accuracy GNSS positioning.
Why surveyors ComNav AT190 choose:
- GPS L1, L2, L5, GLONASS L1, L2, BeiDou B1, B2, B3 and Galileo E1, E5a, E5b tracking
- High gain (3.5dBi) with superior tracking performance at low elevation angle
- Compact size and low noise figure
- Ground Plane independent
- High stability and repeatability at phase center
- IP67-level waterproof design
SKU: ComNav AT190 -
Antenna's, GPS receivers
ComNav AT340
The AT340 is a super performance GNSS Antenna that can track GPS, GLONASS, BeiDou, Galileo, L-Band and SBAS. Its high gain and wide beam provide good signal tracking performance even satellites at low elevation angle. It is a good choice for customers to develop systems or solutions for land survey, agriculture, construction and deformation monitoring.
Why surveyors choose ComNav AT340:
- Support GPS L1/L2/L5, GLONASS L1/L2 and BeiDou B1/B2/B3 Galileo E1/E5a/E5b/AltBoc, L-Band and SBAS
- Multi-feed design provides stable phase center and multi path rejection capability
- Its high gain and wide beam width provide good signal tracking performance when satellites are at low elevation angle
- Water-proof and dust-proof design ensures absolute seal of kernel parts, capable for work in harsh environment
- Lightning proof circuit inside protects the LNA from surge immunity
SKU: ComNav AT340 -
Antenna's, GPS receivers
ComNav AT360
The AT360 is a super performance GNSS Antenna that can track GPS, GLONASS, BeiDou, Galileo, L-Band and SBAS. Its high gain and wide beam provide good signal tracking performance even satellites at low elevation angle. It is a good choice for customers to develop systems or solutions for land survey, agriculture, construction and deformation monitoring.
Why surveyors choose ComNav AT360:
- Support GPS L1/L2/L5, GLONASS L1/L2 and BeiDou B1/B2/B3 Galileo E1/E5a/E5b, L-Band and SBAS
- Multi-feed design provides stable phase center and multipath rejection capability
- Its high gain and wide beam width provide good signal tracking performance when satellites are at low elevation angle
- Water-proof and dust-proof design ensures absolute seal of kernel parts, capable for work in harsh environment
- Lightning proof circuit inside protects the LNA from surge immunity
SKU: ComNav AT360 -
Antenna's, GPS receivers
ComNav AT410
The AT410 is a high-performance four-in-one GNSS antenna that can track GNSS, Bluetooth, Wi-Fi and 4G. With flexible transmission and strong positioning capability, it is specifically designed to simplify the development of positioning-related applications for integrators.
Why surveyors choose ComNav AT410:
- GNSS, Bluetooth, Wi-Fi and 4G four-in-one GNSS antenna.
- Support GPS L1/L2/L5, GLONASS L1/L2, BeiDou B1/B2/B3, BeiDou Global B1C/B2a, Galileo E1/E5a/E5b/AltBoC, QZSS L1/L2/L5, IRNSS, SBAS and L-Band
- Easy for integration
- Low noise amplifier and high gain
- Sub-millimeter level phase center error with outstanding stability and repeatability
SKU: ComNav AT410 -
Antenna's, GPS receivers
ComNav AT600
The AT600 is a high-performance choke ring antenna that can track GPS, GLONASS, BeiDou, BeiDou Global and Galileo. Featuring high gain, high accuracy, high reliability and full-constellation. Designed for land surveying, precision agriculture, deformation monitoring, CORS and related GNSS applications
Why surveyors choose ComNav AT600:
- Support BeiDou B1/B2/B3, BeiDou Global B1C/ B2a, GPS L1/L2/L5, GLONASS L1/L2, Galileo E1/E5a/E5b/E6, IRNSS, QZSS, SBAS and L-Band
- 3D chock ring structure design with excellent multipath rejection capability
- Low noise amplifier to improve anti-interference performance
- Sub-millimeter level phase center error with outstanding stability and repeatability
- High gain for strong low elevation angle signal tracking capability
- Superior IP68 waterproof and dustproof level make it capable for work in harsh environment
SKU: ComNav AT600 -
GPS receivers, OEM Boards
Comnav K803
Design for UAV, Robotic systems, Marine system, deformation Monitoring, Land surveying, Portable terminals, Internet of things, GBAS, Personnel positioning, GIS and Machine control. 30mm×30mm×3.2mm size module with surface-mounted design makes K803 modules ideal for users to integrate. The power consumption is lower to 1.0W.
SKU: K803 -
GPS receivers, OEM Boards
Comnav K823
The K823 incorporates ComNav’s new generation high-accuracy Quantum III SoC chip with the capability of tracking all the GNSS constellations and signals. It can provide users with highly reliable positioning information with support of high-performance floating point arithmetic.
SKU: K823