ComNav AT160
The compact-sized AT160 helix antenna is designed with high stability and repeatability at phase center, and its high gain ensures a superior performance even at low elevation angle. Available from single frequency to triple frequency, AT-series Helix antennas are optimal for Unmanned Aerial Vehicle, GIS, RTK and related mobile devices where need high accuracy GNSS positioning.
Why surveyors choose ComNav AT160:
- Support GPS L1/L2/L5, GLONASS L1/L2, BeiDou B1/B2/B3, BeiDou Global B1C/B2a, Galileo E1/E5a/E5b and SBAS
- Low noise amplifier and high gain
- Sub-millimeter level phase center error with outstanding stability and repeatability
- Strong capability of tracking satellites at low elevation angle
- Superior waterproof and dust proof design
Login to view prices
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
You may also like…
-
GPS receivers, Antenna's
Tersus AX3705
AX3705 is a helix antenna, which supports four constellations and dual frequency, and is designed for UAV system and mobile devices. It can be used in aerial photographs, telemetry technology, disaster monitoring, traffic patrol and security monitoring, etc. This helix antenna has exceptional pattern control, polarization purity and high efficiency in a very compact form factor. Antenna element has high gain and wide beam width to ensure the signal receiving performance of satellite at low eleva
SKU: tersus-ax3705 -
GPS receivers, Antenna's
Harxon HX-CH6017A
Harxon’s D-QHA technology ensures HX-CH6017A more stable performance of wide-angle circular polarization (WACP), and smaller antenna phase center deviation (PCV), which ensures a more precise positioning accuracy.
The Harxon HX-CH6017A Supports GPS L1/L2 GLONASS L1/L2 BDS B1/B2 Galileo E1
Why surveyors choose Harxon HX-CH6017A:
Support GPS, Glonass, Galileo, Beidou, QZSS and SBAS signal reception
- Stable phase center guarantees the accuracy of positioning within millimeter level
- Strong anti-interference ability to endure the harsh operating environments
- 7g light weight for lower power consumption • Built-in RTK antenna to improve UAV performance
- Can be customized
SKU: HX-CH6017A -
GPS receivers, Antenna's
Harxon HX-CH4601A
Harxon’s D-QHA technology ensures HX-CH4601A more stable performance of wide-angle circular polarization (WACP), and smaller antenna phase center deviation (PCV), which ensures a more precise positioning accuracy.
The Harxon HX-CH4601A Supports GPS L1/L2, GLONASS L1/L2 and Galileo E1.
Why surveyors choose Harxon HX-CH4601A:
- Support GPS, Glonass, Galileo, QZSS and SBAS signal reception.
- Stable phase center guarantees the accuracy of positioning within millimeter level.
- Strong anti-interference ability to endure the harsh operating environments
- 25g light weight for lower power consumption
- IP67 ruggedized protection
-
GPS L1/L2 GLONASS L1/L2 Galileo E1
SKU: HX-CH4601A -
GPS receivers, Antenna's
ComNav AT190
The compact-sized AT190 helix antenna is designed with high stability and repeatability at phase center, and its high gain ensures a superior performance even at low elevation angle. Available from single frequency to triple frequency, AT-series Helix antennas are optimal for Unmanned Aerial Vehicle, GIS, RTK and related mobile devices where need high accuracy GNSS positioning.
Why surveyors ComNav AT190 choose:
- GPS L1, L2, L5, GLONASS L1, L2, BeiDou B1, B2, B3 and Galileo E1, E5a, E5b tracking
- High gain (3.5dBi) with superior tracking performance at low elevation angle
- Compact size and low noise figure
- Ground Plane independent
- High stability and repeatability at phase center
- IP67-level waterproof design
SKU: ComNav AT190
Related products
-
GPS receivers, RTK GNSS Receivers
Stonex S900
Stonex S900 RTK GNSS receiver. In combination with an RTK Subscription this receiver is capable of providing centimetre accuracy in real time. Because The Stonex S900 supports GPS, Glonass, Galileo, Beidou and QZSS satellite constellations it is capable of achieving this centimetre accuracy in tough conditions. Down below you can find which frequencies it supports. The Stonex S900 comes in 2 models: the S900 with 555 channels and the S900A with 800 channels. Both model are IMU enabled for tilt surveying up to 60 degrees.
Channels555  IMU Tilt Sensor60º Internet Modem4G UHF Radio410-470MHz, 902.4 – 928MHz GPS L1 C/A, L1C, L2C, L2P, L5 GLONASS L1 C/A, L2C, L2P, L3, L5 GALILEO E1, E5A, E5B, ALTBOC, E6 BEIDOU B1, B2, B3 1x S900A/S900 instrument unit
1x PSAA30R-150, Adapter for battery charger CH 04
2x BP 5S, Li-Ion battery 7.4V – 3400 mAh (S9i, S4IIC/H, S40)
1x CH 04, charger for battery BP 5S
1x Multi-port link cable between receiver and PC or controller [USB or 7-pins lemo for PC or controller, 7-pins lemo for receiver]
1x Measuring tape 3m (MT-300)
1x Carrying case for S900 (CC-900)
1x SW Cube-link
1x Pen Drive set 8Gb with Manual & Video TutorialSKU: n/a -
GPS receivers, RTK GNSS Receivers
South Galaxy G1
The New South Galaxy G1 has more options for GNSS board selection and all of them have the ability to track most signals from all satellite constellations. Choose between a South, Trimble or Novatel GNSS board to track GPS Glonass Galileo BeiDou and SBAS satellites. With an Internal tilt sensor the South Galaxy G1 GNSS receiver you can do tilt surveying up to 30 degrees
Channels220, 555, 692 IMU Tilt Sensor30° Internet Modem4G UHF Radio410 – 470MHz GPS L1C/A, L1C, L2E, L2C, L5 GLONASS L1C/A, L1P, L2C/A, L2P, L3 GALILEO E1, E5a, E5b, Alt-BOC, E6 BEIDOU B1, B2, B3 SKU: n/a -
GPS receivers, Antenna's
HX-CGX601A
The South HX-CGX601A provides a stable phase center offsets at sub-millimeter level to guarantee your reference station an excellent tracking performance. 3D choke rings design inside the antenna helps achieve an outstanding multi-path rejection performance. High-gain design for low elevation tracking enhances signal availability for more satellites. Ultra-low line loss on signal transmissions, enables connecting cable extend more than 100 meters carrying undamaged signals. Fully sealed core components, waterproof and dustproof design, make it withstand severe conditions for continuous work in the field
SKU: south-HX-CGX601A -
There are no reviews yet.