-40%
,

Satlab UAV RTK Automated GNSS Sensor


When the Satlab UAV/RTK is powered up, its field operations are automatically initiated, enabling the built-in computer to control the operation based on pre-set parameters. High precision True heading is then generated based on the direction of the two GNSS Helix Antennas, which are included. The sensor contains both Post Processing Kinematic (PPK) and Real Time Kinematic (RTK). Corrections are delivered in RTK mode via an UHF radio and internal internet modem with NTRIP client. Raw GNSS data can also be logged simultaneously for PPK processing. These features provide full redundancy in the event that either method fails.

Features

  • Multi-Purpose GNSS Receiver
  • MicroSD External Memory (Max. 32 GB)
  • 8 GB of Internal Memory
  • 120 Channels GNSS Tracking

Login to view prices

The sensor comes complete with two serial ports (Low Level TTL), Bluetooth, PPS output, an event marker input, USB port and power input. One of the serial ports can be used to supply 5V DC for powering an autopilot, external UHF radio, camera or other electronics.

The UAV/RTK GNSS sensor utilizes a Novatel GNSS OEM receiver with all options enabled, including heading. The GNSS board can be used for custom applications by controlling it through a serial port. Both multi constellation as well as SBAS satellites are tracked.

Apart from controlling the operation, the sensor also logs events, GGA messages and raw data files in the internal 8 GB memory. This makes it possible to use the sensor with any photogrammetric/autopilot systems, providing the camera trigger signal is available.

Fully Automated GNSS Sensor

Satlab UAV/RTK contains a computer controlling the complete operation according to the pre-set parameters. Powering up the sensor is enough to initiate the field operation.

True Heading Output

Novatel ALIGN Heading™ generates high precision True heading based on the direction between the two included GNSS Helix Antennas.

Multiple Working Modes

Real Time Kinematic (RTK) and Post Processing Kinematic (PPK) are both available in Satlab UAV/RTK sensor. Internal internet modem with NTRIP client and UHF radio are used to deliver corrections in RTK mode. At the same time, raw GNSS data can also be logged for PPK processing. It means, full redundancy if failure in either method.

Communication

The sensor is equipped with Bluetooth, two serial ports (Low Level TTL), event marker input, PPS output, power input and USB port. One of the serial ports supplies 5V 1A DC for powering external UHF radio, Autopilot, Camera or any other electronics.

Compatibility

The sensor not only controls the operation but also logs the events, GGA messages and raw data files in the internal memory of 8GB. Logging makes it possible to use Satlab UAV/RTK sensor with any autopilot/photogrammetric systems as long as camera trigger signal is available.

Latest GNSS Technology

Satlab UAV/RTK utilizes a Novatel* GNSS OEM receiver with heading and all options enabled. The GNSS board can be controlled through Serial Port for custom applications. It tracks multi constellation satellite as well as SBAS satellites. The UAV/RTK is ready to use RTK corrections from NTRIP casters and Satlab InternetRTK servers.

Specifications

Channel Configuration
Channels: 120
GPS: L1, L2, L2C
GLONASS: L1, L2
BeiDou: B1, B2
Galileo: E1, E5b
QZSS: L1, L2C
SBAS: L1 C/A
Horizontal Position Accuracy (RMS)
Single Point L1: 1.5 m
Single Point L1/L2: 1.2 m
SBAS: 0.6 m
DGPS: 0.4 m
RTK: 1 cm + 1 ppm
Physical
Input voltage: 6 – 36V DC
Size: 9.4 cm x 5.2 cm x 2.8 cm
Weight: 190 grams
SKU: Satlab-UAV-RTK-BOX Categories: , Tag:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

SHOPPING CART

close