Shop
Showing 1–15 of 469 results
-
Accessories, Mounts, tablet mounts
10 inch rugged tablet bracket
The mount consists of a spring loaded back plate and custom support cups for rugged tablets. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications. It comes with a pole mount for easy attachment to your surveying pole.
Cradle Dimensions:
Height: 10.75″ to 13.375″ ( 27.30cm to 33.4 cm)
Width: 6.5″ to 7.75″ (16.50cm to 19,6 cm)
Depth: 0.13″ to 0.93″ (0.33cm to 2.35 cm)SKU: tablet-bracket-rugged-8-inch -
Accessories, Mounts, tablet mounts
10 inch tablet bracket
The mount consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The mount expands and contracts for perfect fit of most 10″ tablets with or without sleeves, as well as some smaller tablets. Soft rubber fingers apply just enough force to keep your tablet in safe and secure. Compatible with a wide range of mounting solutions, your tablet is sure to find a home no matter where your travels take you. It comes with a pole mount for easy attachment to a surveying pole
Holder Dimensions:
Minimum Width = 6.25″ (15,9 cm)
Maximum Width = 8.1″ (20.6 cm)
Depth = 0.875″ (2,2 cm)
Maximum Length (using additional side supports) = 10.25″ – (26.04 cm)
SKU: tablet-bracket-10-inch -
-
Accessories, Mounts, tablet mounts
8 inch tablet bracket
The mount consists of a spring loaded holder and 1″ rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The mount expands and contracts for perfect fit of most 7″ or 8″ tablets. The mount has a clean and clever four leg design that sports great holding power without hiding your tablet behind foam pads and plastic. It comes with a pole mount for easy attachment to a surveying pole.
Holder Dimensions:
Minimum Width = 2.25″ (5,7 cm)
(Devices 2.25″ in width must be a minimum of 7″ (17,8 cm) in height to fit)
Maximum Width = 5.75″ (14,6 cm)
Depth = 0.875″ (2,2 cm)SKU: tablet-bracket-8-inch -
GPS receivers, RTK GNSS Receivers
a-GEO L8
L8 is a high-end multi-functional GNSS receiver, with a new generation of algorithm engine, Linux system, tilt survey, built-in 4G/Radio module and Bluetooth/Wi-Fi. It adopts a new appearance design, the magnesium alloy structure, and highly integrated module design. It is a perfectly multifunctional compact GNSS receiver.Channels
866 IMU Tilt Sensor
60º Internet Modem
4G UHF Radio
410 – 470MHz GPS L1, L2, L5 GLONASS L1, L2 GALILEO E1, E5A, E5B BEIDOU B1, B2, B3 SKU: a-GEO L8 -
GPS receivers, RTK GNSS Receivers
a-GEO NetBox1
NetBox1 is a mini portable multi-functional GNSS receiver, with a new generation of algorithm engine, Linux system, tilt survey, built-in 4G all Netcom and Bluetooth/Wi-Fi. It adopts a new appearance design, the magnesium alloy structure, and highly integrated module design. It is a perfectly multifunctional compact GNSS receiver.
Channels
432 IMU Tilt Sensor
60° Internet Modem
4G UHF Radio
410 – 470MHz GPS L1, L1C, L5 GLONASS L1, L2 GALILEO E1, E5A, E5B BEIDOU B1, B2, B3 SKU: a-GEO NetBox1 -
-
-
Data collectors, Tablets
Apglos Armor tablet
This rugged tablet comes with a charger, a bag and some adaptors. This makes it easy to carry the tablet to any location. It will also be easy to add any USB device like a mouse or a keyboard to this Android tablet. This way you can make it a complete computer.
SKU: DC-1 -
demo software licences, Software
Aplitop Tcp GPS (DEMO)
[ux_price_table price=”USE COUPON CODE {DEMO} IN CART FOR 100% DISCOUNT” title=”This is a free download” featured=”false” description=”Try Aplitop TcpGPS for Android and Windows! This demo installations allows you to use TcpGPS for 30 days and test out all its features.”]
[bullet_item text=”Try it before you buy it”]
[bullet_item text=”Test all features so you’re sure it meets your standards”]
[bullet_item text=”Allows you to check if your hardware is compatible”]
[/ux_price_table]A Software Serial Number (SSN) or Globally Unique ID (GUID) is issued when you purchase the software. You can buy one for Aplitop TcpGPS here
HOW TO DOWNLOAD:
- Select your device and add it to your cart (make sure only this product is added)
- Go to your cart and use coupon code “DEMO” to get 100% discount
- Proceed with the checkout – You don’t have to pay
- Download your file from “Downloads
SKU: n/a